The System Error Codes are very broad. Each one can occur in one of many hundreds of locations in the system. Consequently the descriptions of these codes cannot be very specific. Use of these codes requires some amount of investigation and analysis. You need to note both the programmatic and the run-time context in which these errors occur. Because these codes are defined in WinError.h for anyone to use, sometimes the codes are returned by non-system software. Sometimes the code is returned by a function deep in the stack and far removed from your code that is handling the error.

The following list describes system error codes (errors 12000 to 15999). They are returned by the GetLastError function when many functions fail. To retrieve the description text for the error in your application, use the FormatMessage function with the FORMAT_MESSAGE_FROM_SYSTEM flag.

Codes

ERROR_INTERNET_*

12000 – 12175 (0x2EE0) – See Internet Error Codes and WinInet.h.

ERROR_IPSEC_QM_POLICY_EXISTS

13000 (0x32C8) – The specified quick mode policy already exists.

ERROR_IPSEC_QM_POLICY_NOT_FOUND

13001 (0x32C9) – The specified quick mode policy was not found.

ERROR_IPSEC_QM_POLICY_IN_USE

13002 (0x32CA) – The specified quick mode policy is being used.

ERROR_IPSEC_MM_POLICY_EXISTS

13003 (0x32CB) – The specified main mode policy already exists.

ERROR_IPSEC_MM_POLICY_NOT_FOUND

13004 (0x32CC) – The specified main mode policy was not found.

ERROR_IPSEC_MM_POLICY_IN_USE

13005 (0x32CD) – The specified main mode policy is being used.

ERROR_IPSEC_MM_FILTER_EXISTS

13006 (0x32CE) – The specified main mode filter already exists.

ERROR_IPSEC_MM_FILTER_NOT_FOUND

13007 (0x32CF) – The specified main mode filter was not found.

ERROR_IPSEC_TRANSPORT_FILTER_EXISTS

13008 (0x32D0) – The specified transport mode filter already exists.

ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND

13009 (0x32D1) – The specified transport mode filter does not exist.

ERROR_IPSEC_MM_AUTH_EXISTS

13010 (0x32D2) – The specified main mode authentication list exists.

ERROR_IPSEC_MM_AUTH_NOT_FOUND

13011 (0x32D3) – The specified main mode authentication list was not found.

ERROR_IPSEC_MM_AUTH_IN_USE

13012 (0x32D4) – The specified main mode authentication list is being used.

ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND

13013 (0x32D5) – The specified default main mode policy was not found.

ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND

13014 (0x32D6) – The specified default main mode authentication list was not found.

ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND

13015 (0x32D7) – The specified default quick mode policy was not found.

ERROR_IPSEC_TUNNEL_FILTER_EXISTS

13016 (0x32D8) – The specified tunnel mode filter exists.

ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND

13017 (0x32D9) – The specified tunnel mode filter was not found.

ERROR_IPSEC_MM_FILTER_PENDING_DELETION

13018 (0x32DA) – The Main Mode filter is pending deletion.

ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION

13019 (0x32DB) – The transport filter is pending deletion.

ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION

13020 (0x32DC) – The tunnel filter is pending deletion.

ERROR_IPSEC_MM_POLICY_PENDING_DELETION

13021 (0x32DD) – The Main Mode policy is pending deletion.

ERROR_IPSEC_MM_AUTH_PENDING_DELETION

13022 (0x32DE) – The Main Mode authentication bundle is pending deletion.

ERROR_IPSEC_QM_POLICY_PENDING_DELETION

13023 (0x32DF) – The Quick Mode policy is pending deletion.

WARNING_IPSEC_MM_POLICY_PRUNED

13024 (0x32E0) – The Main Mode policy was successfully added, but some of the requested offers are not supported.

WARNING_IPSEC_QM_POLICY_PRUNED

13025 (0x32E1) – The Quick Mode policy was successfully added, but some of the requested offers are not supported.

ERROR_IPSEC_IKE_NEG_STATUS_BEGIN

13800 (0x35E8) – ERROR_IPSEC_IKE_NEG_STATUS_BEGIN

ERROR_IPSEC_IKE_AUTH_FAIL

13801 (0x35E9) – IKE authentication credentials are unacceptable.

ERROR_IPSEC_IKE_ATTRIB_FAIL

13802 (0x35EA) – IKE security attributes are unacceptable.

ERROR_IPSEC_IKE_NEGOTIATION_PENDING

13803 (0x35EB) – IKE Negotiation in progress.

ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR

13804 (0x35EC) – General processing error.

ERROR_IPSEC_IKE_TIMED_OUT

13805 (0x35ED) – Negotiation timed out.

ERROR_IPSEC_IKE_NO_CERT

13806 (0x35EE) – IKE failed to find valid machine certificate. Contact your Network Security Administrator about installing a valid certificate in the appropriate Certificate Store.

ERROR_IPSEC_IKE_SA_DELETED

13807 (0x35EF) – IKE SA deleted by peer before establishment completed.

ERROR_IPSEC_IKE_SA_REAPED

13808 (0x35F0) – IKE SA deleted before establishment completed.

ERROR_IPSEC_IKE_MM_ACQUIRE_DROP

13809 (0x35F1) – Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_QM_ACQUIRE_DROP

13810 (0x35F2) – Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_QUEUE_DROP_MM

13811 (0x35F3) – Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM

13812 (0x35F4) – Negotiation request sat in Queue too long.

ERROR_IPSEC_IKE_DROP_NO_RESPONSE

13813 (0x35F5) – No response from peer.

ERROR_IPSEC_IKE_MM_DELAY_DROP

13814 (0x35F6) – Negotiation took too long.

ERROR_IPSEC_IKE_QM_DELAY_DROP

13815 (0x35F7) – Negotiation took too long.

ERROR_IPSEC_IKE_ERROR

13816 (0x35F8) – Unknown error occurred.

ERROR_IPSEC_IKE_CRL_FAILED

13817 (0x35F9) – Certificate Revocation Check failed.

ERROR_IPSEC_IKE_INVALID_KEY_USAGE

13818 (0x35FA) – Invalid certificate key usage.

ERROR_IPSEC_IKE_INVALID_CERT_TYPE

13819 (0x35FB) – Invalid certificate type.

ERROR_IPSEC_IKE_NO_PRIVATE_KEY

13820 (0x35FC) – IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing with a certificate that has a private key.

ERROR_IPSEC_IKE_SIMULTANEOUS_REKEY

13821 (0x35FD) – Simultaneous rekeys were detected.

ERROR_IPSEC_IKE_DH_FAIL

13822 (0x35FE) – Failure in Diffie-Hellman computation.

ERROR_IPSEC_IKE_CRITICAL_PAYLOAD_NOT_RECOGNIZED

13823 (0x35FF) – Don’t know how to process critical payload.

ERROR_IPSEC_IKE_INVALID_HEADER

13824 (0x3600) – Invalid header.

ERROR_IPSEC_IKE_NO_POLICY

13825 (0x3601) – No policy configured.

ERROR_IPSEC_IKE_INVALID_SIGNATURE

13826 (0x3602) – Failed to verify signature.

ERROR_IPSEC_IKE_KERBEROS_ERROR

13827 (0x3603) – Failed to authenticate using Kerberos.

ERROR_IPSEC_IKE_NO_PUBLIC_KEY

13828 (0x3604) – Peer’s certificate did not have a public key.

ERROR_IPSEC_IKE_PROCESS_ERR

13829 (0x3605) – Error processing error payload.

ERROR_IPSEC_IKE_PROCESS_ERR_SA

13830 (0x3606) – Error processing SA payload.

ERROR_IPSEC_IKE_PROCESS_ERR_PROP

13831 (0x3607) – Error processing Proposal payload.

ERROR_IPSEC_IKE_PROCESS_ERR_TRANS

13832 (0x3608) – Error processing Transform payload.

ERROR_IPSEC_IKE_PROCESS_ERR_KE

13833 (0x3609) – Error processing KE payload.

ERROR_IPSEC_IKE_PROCESS_ERR_ID

13834 (0x360A) – Error processing ID payload.

ERROR_IPSEC_IKE_PROCESS_ERR_CERT

13835 (0x360B) – Error processing Cert payload.

ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ

13836 (0x360C) – Error processing Certificate Request payload.

ERROR_IPSEC_IKE_PROCESS_ERR_HASH

13837 (0x360D) – Error processing Hash payload.

ERROR_IPSEC_IKE_PROCESS_ERR_SIG

13838 (0x360E) – Error processing Signature payload.

ERROR_IPSEC_IKE_PROCESS_ERR_NONCE

13839 (0x360F) – Error processing Nonce payload.

ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY

13840 (0x3610) – Error processing Notify payload.

ERROR_IPSEC_IKE_PROCESS_ERR_DELETE

13841 (0x3611) – Error processing Delete Payload.

ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR

13842 (0x3612) – Error processing VendorId payload.

ERROR_IPSEC_IKE_INVALID_PAYLOAD

13843 (0x3613) – Invalid payload received.

ERROR_IPSEC_IKE_LOAD_SOFT_SA

13844 (0x3614) – Soft SA loaded.

ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN

13845 (0x3615) – Soft SA torn down.

ERROR_IPSEC_IKE_INVALID_COOKIE

13846 (0x3616) – Invalid cookie received.

ERROR_IPSEC_IKE_NO_PEER_CERT

13847 (0x3617) – Peer failed to send valid machine certificate.

ERROR_IPSEC_IKE_PEER_CRL_FAILED

13848 (0x3618) – Certification Revocation check of peer’s certificate failed.

ERROR_IPSEC_IKE_POLICY_CHANGE

13849 (0x3619) – New policy invalidated SAs formed with old policy.

ERROR_IPSEC_IKE_NO_MM_POLICY

13850 (0x361A) – There is no available Main Mode IKE policy.

ERROR_IPSEC_IKE_NOTCBPRIV

13851 (0x361B) – Failed to enabled TCB privilege.

ERROR_IPSEC_IKE_SECLOADFAIL

13852 (0x361C) – Failed to load SECURITY.DLL.

ERROR_IPSEC_IKE_FAILSSPINIT

13853 (0x361D) – Failed to obtain security function table dispatch address from SSPI.

ERROR_IPSEC_IKE_FAILQUERYSSP

13854 (0x361E) – Failed to query Kerberos package to obtain max token size.

ERROR_IPSEC_IKE_SRVACQFAIL

13855 (0x361F) – Failed to obtain Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication will not function. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.

ERROR_IPSEC_IKE_SRVQUERYCRED

13856 (0x3620) – Failed to determine SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).

ERROR_IPSEC_IKE_GETSPIFAIL

13857 (0x3621) – Failed to obtain new SPI for the inbound SA from IPsec driver. The most common cause for this is that the driver does not have the correct filter. Check your policy to verify the filters.

ERROR_IPSEC_IKE_INVALID_FILTER

13858 (0x3622) – Given filter is invalid.

ERROR_IPSEC_IKE_OUT_OF_MEMORY

13859 (0x3623) – Memory allocation failed.

ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED

13860 (0x3624) – Failed to add Security Association to IPsec Driver. The most common cause for this is if the IKE negotiation took too long to complete. If the problem persists, reduce the load on the faulting machine.

ERROR_IPSEC_IKE_INVALID_POLICY

13861 (0x3625) – Invalid policy.

ERROR_IPSEC_IKE_UNKNOWN_DOI

13862 (0x3626) – Invalid DOI.

ERROR_IPSEC_IKE_INVALID_SITUATION

13863 (0x3627) – Invalid situation.

ERROR_IPSEC_IKE_DH_FAILURE

13864 (0x3628) – Diffie-Hellman failure.

ERROR_IPSEC_IKE_INVALID_GROUP

13865 (0x3629) – Invalid Diffie-Hellman group.

ERROR_IPSEC_IKE_ENCRYPT

13866 (0x362A) – Error encrypting payload.

ERROR_IPSEC_IKE_DECRYPT

13867 (0x362B) – Error decrypting payload.

ERROR_IPSEC_IKE_POLICY_MATCH

13868 (0x362C) – Policy match error.

ERROR_IPSEC_IKE_UNSUPPORTED_ID

13869 (0x362D) – Unsupported ID.

ERROR_IPSEC_IKE_INVALID_HASH

13870 (0x362E) – Hash verification failed.

ERROR_IPSEC_IKE_INVALID_HASH_ALG

13871 (0x362F) – Invalid hash algorithm.

ERROR_IPSEC_IKE_INVALID_HASH_SIZE

13872 (0x3630) – Invalid hash size.

ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG

13873 (0x3631) – Invalid encryption algorithm.

ERROR_IPSEC_IKE_INVALID_AUTH_ALG

13874 (0x3632) – Invalid authentication algorithm.

ERROR_IPSEC_IKE_INVALID_SIG

13875 (0x3633) – Invalid certificate signature.

ERROR_IPSEC_IKE_LOAD_FAILED

13876 (0x3634) – Load failed.

ERROR_IPSEC_IKE_RPC_DELETE

13877 (0x3635) – Deleted via RPC call.

ERROR_IPSEC_IKE_BENIGN_REINIT

13878 (0x3636) – Temporary state created to perform reinitialization. This is not a real failure.

ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY

13879 (0x3637) – The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.

ERROR_IPSEC_IKE_INVALID_MAJOR_VERSION

13880 (0x3638) – The recipient cannot handle version of IKE specified in the header.

ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN

13881 (0x3639) – Key length in certificate is too small for configured security requirements.

ERROR_IPSEC_IKE_MM_LIMIT

13882 (0x363A) – Max number of established MM SAs to peer exceeded.

ERROR_IPSEC_IKE_NEGOTIATION_DISABLED

13883 (0x363B) – IKE received a policy that disables negotiation.

ERROR_IPSEC_IKE_QM_LIMIT

13884 (0x363C) – Reached maximum quick mode limit for the main mode. New main mode will be started.

ERROR_IPSEC_IKE_MM_EXPIRED

13885 (0x363D) – Main mode SA lifetime expired or peer sent a main mode delete.

ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID

13886 (0x363E) – Main mode SA assumed to be invalid because peer stopped responding.

ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH

13887 (0x363F) – Certificate doesn’t chain to a trusted root in IPsec policy.

ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID

13888 (0x3640) – Received unexpected message ID.

ERROR_IPSEC_IKE_INVALID_AUTH_PAYLOAD

13889 (0x3641) – Received invalid authentication offers.

ERROR_IPSEC_IKE_DOS_COOKIE_SENT

13890 (0x3642) – Sent DoS cookie notify to initiator.

ERROR_IPSEC_IKE_SHUTTING_DOWN

13891 (0x3643) – IKE service is shutting down.

ERROR_IPSEC_IKE_CGA_AUTH_FAILED

13892 (0x3644) – Could not verify binding between CGA address and certificate.

ERROR_IPSEC_IKE_PROCESS_ERR_NATOA

13893 (0x3645) – Error processing NatOA payload.

ERROR_IPSEC_IKE_INVALID_MM_FOR_QM

13894 (0x3646) – Parameters of the main mode are invalid for this quick mode.

ERROR_IPSEC_IKE_QM_EXPIRED

13895 (0x3647) – Quick mode SA was expired by IPsec driver.

ERROR_IPSEC_IKE_TOO_MANY_FILTERS

13896 (0x3648) – Too many dynamically added IKEEXT filters were detected.

ERROR_IPSEC_IKE_NEG_STATUS_END

13897 (0x3649) – ERROR_IPSEC_IKE_NEG_STATUS_END

ERROR_IPSEC_IKE_KILL_DUMMY_NAP_TUNNEL

13898 (0x364A) – NAP reauth succeeded and must delete the dummy NAP IKEv2 tunnel.

ERROR_IPSEC_IKE_INNER_IP_ASSIGNMENT_FAILURE

13899 (0x364B) – Error in assigning inner IP address to initiator in tunnel mode.

ERROR_IPSEC_IKE_REQUIRE_CP_PAYLOAD_MISSING

13900 (0x364C) – Require configuration payload missing.

ERROR_IPSEC_KEY_MODULE_IMPERSONATION_NEGOTIATION_PENDING

13901 (0x364D) – A negotiation running as the security principle who issued the connection is in progress.

ERROR_IPSEC_IKE_COEXISTENCE_SUPPRESS

13902 (0x364E) – SA was deleted due to IKEv1/AuthIP co-existence suppress check.

ERROR_IPSEC_IKE_RATELIMIT_DROP

13903 (0x364F) – Incoming SA request was dropped due to peer IP address rate limiting.

ERROR_IPSEC_IKE_PEER_DOESNT_SUPPORT_MOBIKE

13904 (0x3650) – Peer does not support MOBIKE.

ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE

13905 (0x3651) – SA establishment is not authorized.

ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_FAILURE

13906 (0x3652) – SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential.

ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE_WITH_OPTIONAL_RETRY

13907 (0x3653) – SA establishment is not authorized. You may need to enter updated or different credentials such as a smartcard.

ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_AND_CERTMAP_FAILURE

13908 (0x3654) – SA establishment is not authorized because there is not a sufficiently strong PKINIT-based credential. This might be related to certificate-to-account mapping failure for the SA.

ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END

13909 (0x3655) – ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END

ERROR_IPSEC_BAD_SPI

13910 (0x3656) – The SPI in the packet does not match a valid IPsec SA.

ERROR_IPSEC_SA_LIFETIME_EXPIRED

13911 (0x3657) – Packet was received on an IPsec SA whose lifetime has expired.

ERROR_IPSEC_WRONG_SA

13912 (0x3658) – Packet was received on an IPsec SA that does not match the packet characteristics.

ERROR_IPSEC_REPLAY_CHECK_FAILED

13913 (0x3659) – Packet sequence number replay check failed.

ERROR_IPSEC_INVALID_PACKET

13914 (0x365A) – IPsec header and/or trailer in the packet is invalid.

ERROR_IPSEC_INTEGRITY_CHECK_FAILED

13915 (0x365B) – IPsec integrity check failed.

ERROR_IPSEC_CLEAR_TEXT_DROP

13916 (0x365C) – IPsec dropped a clear text packet.

ERROR_IPSEC_AUTH_FIREWALL_DROP

13917 (0x365D) – IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign.

ERROR_IPSEC_THROTTLE_DROP

13918 (0x365E) – IPsec dropped a packet due to DoS throttling.

ERROR_IPSEC_DOSP_BLOCK

13925 (0x3665) – IPsec DoS Protection matched an explicit block rule.

ERROR_IPSEC_DOSP_RECEIVED_MULTICAST

13926 (0x3666) – IPsec DoS Protection received an IPsec specific multicast packet which is not allowed.

ERROR_IPSEC_DOSP_INVALID_PACKET

13927 (0x3667) – IPsec DoS Protection received an incorrectly formatted packet.

ERROR_IPSEC_DOSP_STATE_LOOKUP_FAILED

13928 (0x3668) – IPsec DoS Protection failed to look up state.

ERROR_IPSEC_DOSP_MAX_ENTRIES

13929 (0x3669) – IPsec DoS Protection failed to create state because the maximum number of entries allowed by policy has been reached.

ERROR_IPSEC_DOSP_KEYMOD_NOT_ALLOWED

13930 (0x366A) – IPsec DoS Protection received an IPsec negotiation packet for a keying module which is not allowed by policy.

ERROR_IPSEC_DOSP_NOT_INSTALLED

13931 (0x366B) – IPsec DoS Protection has not been enabled.

ERROR_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES

13932 (0x366C) – IPsec DoS Protection failed to create a per internal IP rate limit queue because the maximum number of queues allowed by policy has been reached.

ERROR_SXS_SECTION_NOT_FOUND

14000 (0x36B0) – The requested section was not present in the activation context.

ERROR_SXS_CANT_GEN_ACTCTX

14001 (0x36B1) – The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

ERROR_SXS_INVALID_ACTCTXDATA_FORMAT

14002 (0x36B2) – The application binding data format is invalid.

ERROR_SXS_ASSEMBLY_NOT_FOUND

14003 (0x36B3) – The referenced assembly is not installed on your system.

ERROR_SXS_MANIFEST_FORMAT_ERROR

14004 (0x36B4) – The manifest file does not begin with the required tag and format information.

ERROR_SXS_MANIFEST_PARSE_ERROR

14005 (0x36B5) – The manifest file contains one or more syntax errors.

ERROR_SXS_ACTIVATION_CONTEXT_DISABLED

14006 (0x36B6) – The application attempted to activate a disabled activation context.

ERROR_SXS_KEY_NOT_FOUND

14007 (0x36B7) – The requested lookup key was not found in any active activation context.

ERROR_SXS_VERSION_CONFLICT

14008 (0x36B8) – A component version required by the application conflicts with another component version already active.

ERROR_SXS_WRONG_SECTION_TYPE

14009 (0x36B9) – The type requested activation context section does not match the query API used.

ERROR_SXS_THREAD_QUERIES_DISABLED

14010 (0x36BA) – Lack of system resources has required isolated activation to be disabled for the current thread of execution.

ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET

14011 (0x36BB) – An attempt to set the process default activation context failed because the process default activation context was already set.

ERROR_SXS_UNKNOWN_ENCODING_GROUP

14012 (0x36BC) – The encoding group identifier specified is not recognized.

ERROR_SXS_UNKNOWN_ENCODING

14013 (0x36BD) – The encoding requested is not recognized.

ERROR_SXS_INVALID_XML_NAMESPACE_URI

14014 (0x36BE) – The manifest contains a reference to an invalid URI.

ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED

14015 (0x36BF) – The application manifest contains a reference to a dependent assembly which is not installed.

ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED

14016 (0x36C0) – The manifest for an assembly used by the application has a reference to a dependent assembly which is not installed.

ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE

14017 (0x36C1) – The manifest contains an attribute for the assembly identity which is not valid.

ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE

14018 (0x36C2) – The manifest is missing the required default namespace specification on the assembly element.

ERROR_SXS_MANIFEST_INVALID_REQUIRED_DEFAULT_NAMESPACE

14019 (0x36C3) – The manifest has a default namespace specified on the assembly element but its value is not “urn:schemas-microsoft-com:asm.v1”.

ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT

14020 (0x36C4) – The private manifest probed has crossed a path with an unsupported reparse point.

ERROR_SXS_DUPLICATE_DLL_NAME

14021 (0x36C5) – Two or more components referenced directly or indirectly by the application manifest have files by the same name.

ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME

14022 (0x36C6) – Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.

ERROR_SXS_DUPLICATE_CLSID

14023 (0x36C7) – Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.

ERROR_SXS_DUPLICATE_IID

14024 (0x36C8) – Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.

ERROR_SXS_DUPLICATE_TLBID

14025 (0x36C9) – Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.

ERROR_SXS_DUPLICATE_PROGID

14026 (0x36CA) – Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.

ERROR_SXS_DUPLICATE_ASSEMBLY_NAME

14027 (0x36CB) – Two or more components referenced directly or indirectly by the application manifest are different versions of the same component which is not permitted.

ERROR_SXS_FILE_HASH_MISMATCH

14028 (0x36CC) – A component’s file does not match the verification information present in the component manifest.

ERROR_SXS_POLICY_PARSE_ERROR

14029 (0x36CD) – The policy manifest contains one or more syntax errors.

ERROR_SXS_XML_E_MISSINGQUOTE

14030 (0x36CE) – Manifest Parse Error : A string literal was expected, but no opening quote character was found.

ERROR_SXS_XML_E_COMMENTSYNTAX

14031 (0x36CF) – Manifest Parse Error : Incorrect syntax was used in a comment.

ERROR_SXS_XML_E_BADSTARTNAMECHAR

14032 (0x36D0) – Manifest Parse Error : A name was started with an invalid character.

ERROR_SXS_XML_E_BADNAMECHAR

14033 (0x36D1) – Manifest Parse Error : A name contained an invalid character.

ERROR_SXS_XML_E_BADCHARINSTRING

14034 (0x36D2) – Manifest Parse Error : A string literal contained an invalid character.

ERROR_SXS_XML_E_XMLDECLSYNTAX

14035 (0x36D3) – Manifest Parse Error : Invalid syntax for an xml declaration.

ERROR_SXS_XML_E_BADCHARDATA

14036 (0x36D4) – Manifest Parse Error : An Invalid character was found in text content.

ERROR_SXS_XML_E_MISSINGWHITESPACE

14037 (0x36D5) – Manifest Parse Error : Required white space was missing.

ERROR_SXS_XML_E_EXPECTINGTAGEND

14038 (0x36D6) – Manifest Parse Error : The character ‘>’ was expected.

ERROR_SXS_XML_E_MISSINGSEMICOLON

14039 (0x36D7) – Manifest Parse Error : A semi colon character was expected.

ERROR_SXS_XML_E_UNBALANCEDPAREN

14040 (0x36D8) – Manifest Parse Error : Unbalanced parentheses.

ERROR_SXS_XML_E_INTERNALERROR

14041 (0x36D9) – Manifest Parse Error : Internal error.

ERROR_SXS_XML_E_UNEXPECTED_WHITESPACE

14042 (0x36DA) – Manifest Parse Error : Whitespace is not allowed at this location.

ERROR_SXS_XML_E_INCOMPLETE_ENCODING

14043 (0x36DB) – Manifest Parse Error : End of file reached in invalid state for current encoding.

ERROR_SXS_XML_E_MISSING_PAREN

14044 (0x36DC) – Manifest Parse Error : Missing parenthesis.

ERROR_SXS_XML_E_EXPECTINGCLOSEQUOTE

14045 (0x36DD) – Manifest Parse Error : A single or double closing quote character (\’ or \”) is missing.

ERROR_SXS_XML_E_MULTIPLE_COLONS

14046 (0x36DE) – Manifest Parse Error : Multiple colons are not allowed in a name.

ERROR_SXS_XML_E_INVALID_DECIMAL

14047 (0x36DF) – Manifest Parse Error : Invalid character for decimal digit.

ERROR_SXS_XML_E_INVALID_HEXIDECIMAL

14048 (0x36E0) – Manifest Parse Error : Invalid character for hexadecimal digit.

ERROR_SXS_XML_E_INVALID_UNICODE

14049 (0x36E1) – Manifest Parse Error : Invalid unicode character value for this platform.

ERROR_SXS_XML_E_WHITESPACEORQUESTIONMARK

14050 (0x36E2) – Manifest Parse Error : Expecting whitespace or ‘?’.

ERROR_SXS_XML_E_UNEXPECTEDENDTAG

14051 (0x36E3) – Manifest Parse Error : End tag was not expected at this location.

ERROR_SXS_XML_E_UNCLOSEDTAG

14052 (0x36E4) – Manifest Parse Error : The following tags were not closed: %1.

ERROR_SXS_XML_E_DUPLICATEATTRIBUTE

14053 (0x36E5) – Manifest Parse Error : Duplicate attribute.

ERROR_SXS_XML_E_MULTIPLEROOTS

14054 (0x36E6) – Manifest Parse Error : Only one top level element is allowed in an XML document.

ERROR_SXS_XML_E_INVALIDATROOTLEVEL

14055 (0x36E7) – Manifest Parse Error : Invalid at the top level of the document.

ERROR_SXS_XML_E_BADXMLDECL

14056 (0x36E8) – Manifest Parse Error : Invalid xml declaration.

ERROR_SXS_XML_E_MISSINGROOT

14057 (0x36E9) – Manifest Parse Error : XML document must have a top level element.

ERROR_SXS_XML_E_UNEXPECTEDEOF

14058 (0x36EA) – Manifest Parse Error : Unexpected end of file.

ERROR_SXS_XML_E_BADPEREFINSUBSET

14059 (0x36EB) – Manifest Parse Error : Parameter entities cannot be used inside markup declarations in an internal subset.

ERROR_SXS_XML_E_UNCLOSEDSTARTTAG

14060 (0x36EC) – Manifest Parse Error : Element was not closed.

ERROR_SXS_XML_E_UNCLOSEDENDTAG

14061 (0x36ED) – Manifest Parse Error : End element was missing the character ‘>’.

ERROR_SXS_XML_E_UNCLOSEDSTRING

14062 (0x36EE) – Manifest Parse Error : A string literal was not closed.

ERROR_SXS_XML_E_UNCLOSEDCOMMENT

14063 (0x36EF) – Manifest Parse Error : A comment was not closed.

ERROR_SXS_XML_E_UNCLOSEDDECL

14064 (0x36F0) – Manifest Parse Error : A declaration was not closed.

ERROR_SXS_XML_E_UNCLOSEDCDATA

14065 (0x36F1) – Manifest Parse Error : A CDATA section was not closed.

ERROR_SXS_XML_E_RESERVEDNAMESPACE

14066 (0x36F2) – Manifest Parse Error : The namespace prefix is not allowed to start with the reserved string “xml”.

ERROR_SXS_XML_E_INVALIDENCODING

14067 (0x36F3) – Manifest Parse Error : System does not support the specified encoding.

ERROR_SXS_XML_E_INVALIDSWITCH

14068 (0x36F4) – Manifest Parse Error : Switch from current encoding to specified encoding not supported.

ERROR_SXS_XML_E_BADXMLCASE

14069 (0x36F5) – Manifest Parse Error : The name ‘xml’ is reserved and must be lower case.

ERROR_SXS_XML_E_INVALID_STANDALONE

14070 (0x36F6) – Manifest Parse Error : The standalone attribute must have the value ‘yes’ or ‘no’.

ERROR_SXS_XML_E_UNEXPECTED_STANDALONE

14071 (0x36F7) – Manifest Parse Error : The standalone attribute cannot be used in external entities.

ERROR_SXS_XML_E_INVALID_VERSION

14072 (0x36F8) – Manifest Parse Error : Invalid version number.

ERROR_SXS_XML_E_MISSINGEQUALS

14073 (0x36F9) – Manifest Parse Error : Missing equals sign between attribute and attribute value.

ERROR_SXS_PROTECTION_RECOVERY_FAILED

14074 (0x36FA) – Assembly Protection Error : Unable to recover the specified assembly.

ERROR_SXS_PROTECTION_PUBLIC_KEY_TOO_SHORT

14075 (0x36FB) – Assembly Protection Error : The public key for an assembly was too short to be allowed.

ERROR_SXS_PROTECTION_CATALOG_NOT_VALID

14076 (0x36FC) – Assembly Protection Error : The catalog for an assembly is not valid, or does not match the assembly’s manifest.

ERROR_SXS_UNTRANSLATABLE_HRESULT

14077 (0x36FD) – An HRESULT could not be translated to a corresponding Win32 error code.

ERROR_SXS_PROTECTION_CATALOG_FILE_MISSING

14078 (0x36FE) – Assembly Protection Error : The catalog for an assembly is missing.

ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE

14079 (0x36FF) – The supplied assembly identity is missing one or more attributes which must be present in this context.

ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME

14080 (0x3700) – The supplied assembly identity has one or more attribute names that contain characters not permitted in XML names.

ERROR_SXS_ASSEMBLY_MISSING

14081 (0x3701) – The referenced assembly could not be found.

ERROR_SXS_CORRUPT_ACTIVATION_STACK

14082 (0x3702) – The activation context activation stack for the running thread of execution is corrupt.

ERROR_SXS_CORRUPTION

14083 (0x3703) – The application isolation metadata for this process or thread has become corrupt.

ERROR_SXS_EARLY_DEACTIVATION

14084 (0x3704) – The activation context being deactivated is not the most recently activated one.

ERROR_SXS_INVALID_DEACTIVATION

14085 (0x3705) – The activation context being deactivated is not active for the current thread of execution.

ERROR_SXS_MULTIPLE_DEACTIVATION

14086 (0x3706) – The activation context being deactivated has already been deactivated.

ERROR_SXS_PROCESS_TERMINATION_REQUESTED

14087 (0x3707) – A component used by the isolation facility has requested to terminate the process.

ERROR_SXS_RELEASE_ACTIVATION_CONTEXT

14088 (0x3708) – A kernel mode component is releasing a reference on an activation context.

ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY

14089 (0x3709) – The activation context of system default assembly could not be generated.

ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE

14090 (0x370A) – The value of an attribute in an identity is not within the legal range.

ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME

14091 (0x370B) – The name of an attribute in an identity is not within the legal range.

ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE

14092 (0x370C) – An identity contains two definitions for the same attribute.

ERROR_SXS_IDENTITY_PARSE_ERROR

14093 (0x370D) – The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, missing attribute name or missing attribute value.

ERROR_MALFORMED_SUBSTITUTION_STRING

14094 (0x370E) – A string containing localized substitutable content was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign or an substitution’s right parenthesis was not found.

ERROR_SXS_INCORRECT_PUBLIC_KEY_TOKEN

14095 (0x370F) – The public key token does not correspond to the public key specified.

ERROR_UNMAPPED_SUBSTITUTION_STRING

14096 (0x3710) – A substitution string had no mapping.

ERROR_SXS_ASSEMBLY_NOT_LOCKED

14097 (0x3711) – The component must be locked before making the request.

ERROR_SXS_COMPONENT_STORE_CORRUPT

14098 (0x3712) – The component store has been corrupted.

ERROR_ADVANCED_INSTALLER_FAILED

14099 (0x3713) – An advanced installer failed during setup or servicing.

ERROR_XML_ENCODING_MISMATCH

14100 (0x3714) – The character encoding in the XML declaration did not match the encoding used in the document.

ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT

14101 (0x3715) – The identities of the manifests are identical but their contents are different.

ERROR_SXS_IDENTITIES_DIFFERENT

14102 (0x3716) – The component identities are different.

ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT

14103 (0x3717) – The assembly is not a deployment.

ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY

14104 (0x3718) – The file is not a part of the assembly.

ERROR_SXS_MANIFEST_TOO_BIG

14105 (0x3719) – The size of the manifest exceeds the maximum allowed.

ERROR_SXS_SETTING_NOT_REGISTERED

14106 (0x371A) – The setting is not registered.

ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE

14107 (0x371B) – One or more required members of the transaction are not present.

ERROR_SMI_PRIMITIVE_INSTALLER_FAILED

14108 (0x371C) – The SMI primitive installer failed during setup or servicing.

ERROR_GENERIC_COMMAND_FAILED

14109 (0x371D) – A generic command executable returned a result that indicates failure.

ERROR_SXS_FILE_HASH_MISSING

14110 (0x371E) – A component is missing file verification information in its manifest.

ERROR_EVT_INVALID_CHANNEL_PATH

15000 (0x3A98) – The specified channel path is invalid.

ERROR_EVT_INVALID_QUERY

15001 (0x3A99) – The specified query is invalid.

ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND

15002 (0x3A9A) – The publisher metadata cannot be found in the resource.

ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND

15003 (0x3A9B) – The template for an event definition cannot be found in the resource (error = %1).

ERROR_EVT_INVALID_PUBLISHER_NAME

15004 (0x3A9C) – The specified publisher name is invalid.

ERROR_EVT_INVALID_EVENT_DATA

15005 (0x3A9D) – The event data raised by the publisher is not compatible with the event template definition in the publisher’s manifest.

ERROR_EVT_CHANNEL_NOT_FOUND

15007 (0x3A9F) – The specified channel could not be found. Check channel configuration.

ERROR_EVT_MALFORMED_XML_TEXT

15008 (0x3AA0) – The specified xml text was not well-formed. See Extended Error for more details.

ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL

15009 (0x3AA1) – The caller is trying to subscribe to a direct channel which is not allowed. The events for a direct channel go directly to a logfile and cannot be subscribed to.

ERROR_EVT_CONFIGURATION_ERROR

15010 (0x3AA2) – Configuration error.

ERROR_EVT_QUERY_RESULT_STALE

15011 (0x3AA3) – The query result is stale / invalid. This may be due to the log being cleared or rolling over after the query result was created. Users should handle this code by releasing the query result object and reissuing the query.

ERROR_EVT_QUERY_RESULT_INVALID_POSITION

15012 (0x3AA4) – Query result is currently at an invalid position.

ERROR_EVT_NON_VALIDATING_MSXML

15013 (0x3AA5) – Registered MSXML doesn’t support validation.

ERROR_EVT_FILTER_ALREADYSCOPED

15014 (0x3AA6) – An expression can only be followed by a change of scope operation if it itself evaluates to a node set and is not already part of some other change of scope operation.

ERROR_EVT_FILTER_NOTELTSET

15015 (0x3AA7) – Can’t perform a step operation from a term that does not represent an element set.

ERROR_EVT_FILTER_INVARG

15016 (0x3AA8) – Left hand side arguments to binary operators must be either attributes, nodes or variables and right hand side arguments must be constants.

ERROR_EVT_FILTER_INVTEST

15017 (0x3AA9) – A step operation must involve either a node test or, in the case of a predicate, an algebraic expression against which to test each node in the node set identified by the preceeding node set can be evaluated.

ERROR_EVT_FILTER_INVTYPE

15018 (0x3AAA) – This data type is currently unsupported.

ERROR_EVT_FILTER_PARSEERR

15019 (0x3AAB) – A syntax error occurred at position %1!d!.

ERROR_EVT_FILTER_UNSUPPORTEDOP

15020 (0x3AAC) – This operator is unsupported by this implementation of the filter.

ERROR_EVT_FILTER_UNEXPECTEDTOKEN

15021 (0x3AAD) – The token encountered was unexpected.

ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL

15022 (0x3AAE) – The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before performing the requested operation.

ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE

15023 (0x3AAF) – Channel property %1!s! contains invalid value. The value has invalid type, is outside of valid range, can’t be updated or is not supported by this type of channel.

ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE

15024 (0x3AB0) – Publisher property %1!s! contains invalid value. The value has invalid type, is outside of valid range, can’t be updated or is not supported by this type of publisher.

ERROR_EVT_CHANNEL_CANNOT_ACTIVATE

15025 (0x3AB1) – The channel fails to activate.

ERROR_EVT_FILTER_TOO_COMPLEX

15026 (0x3AB2) – The xpath expression exceeded supported complexity. Please symplify it or split it into two or more simple expressions.

ERROR_EVT_MESSAGE_NOT_FOUND

15027 (0x3AB3) – the message resource is present but the message is not found in the string/message table.

ERROR_EVT_MESSAGE_ID_NOT_FOUND

15028 (0x3AB4) – The message id for the desired message could not be found.

ERROR_EVT_UNRESOLVED_VALUE_INSERT

15029 (0x3AB5) – The substitution string for insert index (%1) could not be found.

ERROR_EVT_UNRESOLVED_PARAMETER_INSERT

15030 (0x3AB6) – The description string for parameter reference (%1) could not be found.

ERROR_EVT_MAX_INSERTS_REACHED

15031 (0x3AB7) – The maximum number of replacements has been reached.

ERROR_EVT_EVENT_DEFINITION_NOT_FOUND

15032 (0x3AB8) – The event definition could not be found for event id (%1).

ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND

15033 (0x3AB9) – The locale specific resource for the desired message is not present.

ERROR_EVT_VERSION_TOO_OLD

15034 (0x3ABA) – The resource is too old to be compatible.

ERROR_EVT_VERSION_TOO_NEW

15035 (0x3ABB) – The resource is too new to be compatible.

ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY

15036 (0x3ABC) – The channel at index %1!d! of the query can’t be opened.

ERROR_EVT_PUBLISHER_DISABLED

15037 (0x3ABD) – The publisher has been disabled and its resource is not avaiable. This usually occurs when the publisher is in the process of being uninstalled or upgraded.

ERROR_EVT_FILTER_OUT_OF_RANGE

15038 (0x3ABE) – Attempted to create a numeric type that is outside of its valid range.

ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE

15080 (0x3AE8) – The subscription fails to activate.

ERROR_EC_LOG_DISABLED

15081 (0x3AE9) – The log of the subscription is in disabled state, and can not be used to forward events to. The log must first be enabled before the subscription can be activated.

ERROR_EC_CIRCULAR_FORWARDING

15082 (0x3AEA) – When forwarding events from local machine to itself, the query of the subscription can’t contain target log of the subscription.

ERROR_EC_CREDSTORE_FULL

15083 (0x3AEB) – The credential store that is used to save credentials is full.

ERROR_EC_CRED_NOT_FOUND

15084 (0x3AEC) – The credential used by this subscription can’t be found in credential store.

ERROR_EC_NO_ACTIVE_CHANNEL

15085 (0x3AED) – No active channel is found for the query.

ERROR_MUI_FILE_NOT_FOUND

15100 (0x3AFC) – The resource loader failed to find MUI file.

ERROR_MUI_INVALID_FILE

15101 (0x3AFD) – The resource loader failed to load MUI file because the file fail to pass validation.

ERROR_MUI_INVALID_RC_CONFIG

15102 (0x3AFE) – The RC Manifest is corrupted with garbage data or unsupported version or missing required item.

ERROR_MUI_INVALID_LOCALE_NAME

15103 (0x3AFF) – The RC Manifest has invalid culture name.

ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME

15104 (0x3B00) – The RC Manifest has invalid ultimatefallback name.

ERROR_MUI_FILE_NOT_LOADED

15105 (0x3B01) – The resource loader cache doesn’t have loaded MUI entry.

ERROR_RESOURCE_ENUM_USER_STOP

15106 (0x3B02) – User stopped resource enumeration.

ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED

15107 (0x3B03) – UI language installation failed.

ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME

15108 (0x3B04) – Locale installation failed.

ERROR_MRM_RUNTIME_NO_DEFAULT_OR_NEUTRAL_RESOURCE

15110 (0x3B06) – A resource does not have default or neutral value.

ERROR_MRM_INVALID_PRICONFIG

15111 (0x3B07) – Invalid PRI config file.

ERROR_MRM_INVALID_FILE_TYPE

15112 (0x3B08) – Invalid file type.

ERROR_MRM_UNKNOWN_QUALIFIER

15113 (0x3B09) – Unknown qualifier.

ERROR_MRM_INVALID_QUALIFIER_VALUE

15114 (0x3B0A) – Invalid qualifier value.

ERROR_MRM_NO_CANDIDATE

15115 (0x3B0B) – No Candidate found.

ERROR_MRM_NO_MATCH_OR_DEFAULT_CANDIDATE

15116 (0x3B0C) – The ResourceMap or NamedResource has an item that does not have default or neutral resource..

ERROR_MRM_RESOURCE_TYPE_MISMATCH

15117 (0x3B0D) – Invalid ResourceCandidate type.

ERROR_MRM_DUPLICATE_MAP_NAME

15118 (0x3B0E) – Duplicate Resource Map.

ERROR_MRM_DUPLICATE_ENTRY

15119 (0x3B0F) – Duplicate Entry.

ERROR_MRM_INVALID_RESOURCE_IDENTIFIER

15120 (0x3B10) – Invalid Resource Identifier.

ERROR_MRM_FILEPATH_TOO_LONG

15121 (0x3B11) – Filepath too long.

ERROR_MRM_UNSUPPORTED_DIRECTORY_TYPE

15122 (0x3B12) – Unsupported directory type.

ERROR_MRM_INVALID_PRI_FILE

15126 (0x3B16) – Invalid PRI File.

ERROR_MRM_NAMED_RESOURCE_NOT_FOUND

15127 (0x3B17) – NamedResource Not Found.

ERROR_MRM_MAP_NOT_FOUND

15135 (0x3B1F) – ResourceMap Not Found.

ERROR_MRM_UNSUPPORTED_PROFILE_TYPE

15136 (0x3B20) – Unsupported MRT profile type.

ERROR_MRM_INVALID_QUALIFIER_OPERATOR

15137 (0x3B21) – Invalid qualifier operator.

ERROR_MRM_INDETERMINATE_QUALIFIER_VALUE

15138 (0x3B22) – Unable to determine qualifier value or qualifier value has not been set.

ERROR_MRM_AUTOMERGE_ENABLED

15139 (0x3B23) – Automerge is enabled in the PRI file.

ERROR_MRM_TOO_MANY_RESOURCES

15140 (0x3B24) – Too many resources defined for package.

ERROR_MCA_INVALID_CAPABILITIES_STRING

15200 (0x3B60) – The monitor returned a DDC/CI capabilities string that did not comply with the ACCESS.bus 3.0, DDC/CI 1.1 or MCCS 2 Revision 1 specification.

ERROR_MCA_INVALID_VCP_VERSION

15201 (0x3B61) – The monitor’s VCP Version (0xDF) VCP code returned an invalid version value.

ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION

15202 (0x3B62) – The monitor does not comply with the MCCS specification it claims to support.

ERROR_MCA_MCCS_VERSION_MISMATCH

15203 (0x3B63) – The MCCS version in a monitor’s mccs_ver capability does not match the MCCS version the monitor reports when the VCP Version (0xDF) VCP code is used.

ERROR_MCA_UNSUPPORTED_MCCS_VERSION

15204 (0x3B64) – The Monitor Configuration API only works with monitors that support the MCCS 1.0 specification, MCCS 2.0 specification or the MCCS 2.0 Revision 1 specification.

ERROR_MCA_INTERNAL_ERROR

15205 (0x3B65) – An internal Monitor Configuration API error occurred.

ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED

15206 (0x3B66) – The monitor returned an invalid monitor technology type. CRT, Plasma and LCD (TFT) are examples of monitor technology types. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.

ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE

15207 (0x3B67) – The caller of SetMonitorColorTemperature specified a color temperature that the current monitor did not support. This error implies that the monitor violated the MCCS 2.0 or MCCS 2.0 Revision 1 specification.

ERROR_AMBIGUOUS_SYSTEM_DEVICE

15250 (0x3B92) – The requested system device cannot be identified due to multiple indistinguishable devices potentially matching the identification criteria.

ERROR_SYSTEM_DEVICE_NOT_FOUND

15299 (0x3BC3) – The requested system device cannot be found.

ERROR_HASH_NOT_SUPPORTED

15300 (0x3BC4) – Hash generation for the specified hash version and hash type is not enabled on the server.

ERROR_HASH_NOT_PRESENT

15301 (0x3BC5) – The hash requested from the server is not available or no longer valid.

ERROR_SECONDARY_IC_PROVIDER_NOT_REGISTERED

15321 (0x3BD9) – The secondary interrupt controller instance that manages the specified interrupt is not registered.

ERROR_GPIO_CLIENT_INFORMATION_INVALID

15322 (0x3BDA) – The information supplied by the GPIO client driver is invalid.

ERROR_GPIO_VERSION_NOT_SUPPORTED

15323 (0x3BDB) – The version specified by the GPIO client driver is not supported.

ERROR_GPIO_INVALID_REGISTRATION_PACKET

15324 (0x3BDC) – The registration packet supplied by the GPIO client driver is not valid.

ERROR_GPIO_OPERATION_DENIED

15325 (0x3BDD) – The requested operation is not suppported for the specified handle.

ERROR_GPIO_INCOMPATIBLE_CONNECT_MODE

15326 (0x3BDE) – The requested connect mode conflicts with an existing mode on one or more of the specified pins.

ERROR_GPIO_INTERRUPT_ALREADY_UNMASKED

15327 (0x3BDF) – The interrupt requested to be unmasked is not masked.

ERROR_CANNOT_SWITCH_RUNLEVEL

15400 (0x3C28) – The requested run level switch cannot be completed successfully.

ERROR_INVALID_RUNLEVEL_SETTING

15401 (0x3C29) – The service has an invalid run level setting. The run level for a service must not be higher than the run level of its dependent services.

ERROR_RUNLEVEL_SWITCH_TIMEOUT

15402 (0x3C2A) – The requested run level switch cannot be completed successfully since one or more services will not stop or restart within the specified timeout.

ERROR_RUNLEVEL_SWITCH_AGENT_TIMEOUT

15403 (0x3C2B) – A run level switch agent did not respond within the specified timeout.

ERROR_RUNLEVEL_SWITCH_IN_PROGRESS

15404 (0x3C2C) – A run level switch is currently in progress.

ERROR_SERVICES_FAILED_AUTOSTART

15405 (0x3C2D) – One or more services failed to start during the service startup phase of a run level switch.

ERROR_COM_TASK_STOP_PENDING

15501 (0x3C8D) – The task stop request cannot be completed immediately since task needs more time to shutdown.

ERROR_INSTALL_OPEN_PACKAGE_FAILED

15600 (0x3CF0) – Package could not be opened.

ERROR_INSTALL_PACKAGE_NOT_FOUND

15601 (0x3CF1) – Package was not found.

ERROR_INSTALL_INVALID_PACKAGE

15602 (0x3CF2) – Package data is invalid.

ERROR_INSTALL_RESOLVE_DEPENDENCY_FAILED

15603 (0x3CF3) – Package failed updates, dependency or conflict validation.

ERROR_INSTALL_OUT_OF_DISK_SPACE

15604 (0x3CF4) – There is not enough disk space on your computer. Please free up some space and try again.

ERROR_INSTALL_NETWORK_FAILURE

15605 (0x3CF5) – There was a problem downloading your product.

ERROR_INSTALL_REGISTRATION_FAILURE

15606 (0x3CF6) – Package could not be registered.

ERROR_INSTALL_DEREGISTRATION_FAILURE

15607 (0x3CF7) – Package could not be unregistered.

ERROR_INSTALL_CANCEL

15608 (0x3CF8) – User cancelled the install request.

ERROR_INSTALL_FAILED

15609 (0x3CF9) – Install failed. Please contact your software vendor.

ERROR_REMOVE_FAILED

15610 (0x3CFA) – Removal failed. Please contact your software vendor.

ERROR_PACKAGE_ALREADY_EXISTS

15611 (0x3CFB) – The provided package is already installed, and reinstallation of the package was blocked. Check the AppXDeployment-Server event log for details.

ERROR_NEEDS_REMEDIATION

15612 (0x3CFC) – The application cannot be started. Try reinstalling the application to fix the problem.

ERROR_INSTALL_PREREQUISITE_FAILED

15613 (0x3CFD) – A Prerequisite for an install could not be satisfied.

ERROR_PACKAGE_REPOSITORY_CORRUPTED

15614 (0x3CFE) – The package repository is corrupted.

ERROR_INSTALL_POLICY_FAILURE

15615 (0x3CFF) – To install this application you need either a Windows developer license or a sideloading-enabled system.

ERROR_PACKAGE_UPDATING

15616 (0x3D00) – The application cannot be started because it is currently updating.

ERROR_DEPLOYMENT_BLOCKED_BY_POLICY

15617 (0x3D01) – The package deployment operation is blocked by policy. Please contact your system administrator.

ERROR_PACKAGES_IN_USE

15618 (0x3D02) – The package could not be installed because resources it modifies are currently in use.

ERROR_RECOVERY_FILE_CORRUPT

15619 (0x3D03) – The package could not be recovered because necessary data for recovery have been corrupted.

ERROR_INVALID_STAGED_SIGNATURE

15620 (0x3D04) – The signature is invalid. To register in developer mode, AppxSignature.p7x and AppxBlockMap.xml must be valid or should not be present.

ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED

15621 (0x3D05) – An error occurred while deleting the package’s previously existing application data.

ERROR_INSTALL_PACKAGE_DOWNGRADE

15622 (0x3D06) – The package could not be installed because a higher version of this package is already installed.

ERROR_SYSTEM_NEEDS_REMEDIATION

15623 (0x3D07) – An error in a system binary was detected. Try refreshing the PC to fix the problem.

ERROR_APPX_INTEGRITY_FAILURE_CLR_NGEN

15624 (0x3D08) – A corrupted CLR NGEN binary was detected on the system.

ERROR_RESILIENCY_FILE_CORRUPT

15625 (0x3D09) – The operation could not be resumed because necessary data for recovery have been corrupted.

ERROR_INSTALL_FIREWALL_SERVICE_NOT_RUNNING

15626 (0x3D0A) – The package could not be installed because the Windows Firewall service is not running. Enable the Windows Firewall service and try again.

APPMODEL_ERROR_NO_PACKAGE

15700 (0x3D54) – The process has no package identity.

APPMODEL_ERROR_PACKAGE_RUNTIME_CORRUPT

15701 (0x3D55) – The package runtime information is corrupted.

APPMODEL_ERROR_PACKAGE_IDENTITY_CORRUPT

15702 (0x3D56) – The package identity is corrupted.

APPMODEL_ERROR_NO_APPLICATION

15703 (0x3D57) – The process has no application identity.

ERROR_STATE_LOAD_STORE_FAILED

15800 (0x3DB8) – Loading the state store failed.

ERROR_STATE_GET_VERSION_FAILED

15801 (0x3DB9) – Retrieving the state version for the application failed.

ERROR_STATE_SET_VERSION_FAILED

15802 (0x3DBA) – Setting the state version for the application failed.

ERROR_STATE_STRUCTURED_RESET_FAILED

15803 (0x3DBB) – Resetting the structured state of the application failed.

ERROR_STATE_OPEN_CONTAINER_FAILED

15804 (0x3DBC) – State Manager failed to open the container.

ERROR_STATE_CREATE_CONTAINER_FAILED

15805 (0x3DBD) – State Manager failed to create the container.

ERROR_STATE_DELETE_CONTAINER_FAILED

15806 (0x3DBE) – State Manager failed to delete the container.

ERROR_STATE_READ_SETTING_FAILED

15807 (0x3DBF) – State Manager failed to read the setting.

ERROR_STATE_WRITE_SETTING_FAILED

15808 (0x3DC0) – State Manager failed to write the setting.

ERROR_STATE_DELETE_SETTING_FAILED

15809 (0x3DC1) – State Manager failed to delete the setting.

ERROR_STATE_QUERY_SETTING_FAILED

15810 (0x3DC2) – State Manager failed to query the setting.

ERROR_STATE_READ_COMPOSITE_SETTING_FAILED

15811 (0x3DC3) – State Manager failed to read the composite setting.

ERROR_STATE_WRITE_COMPOSITE_SETTING_FAILED

15812 (0x3DC4) – State Manager failed to write the composite setting.

ERROR_STATE_ENUMERATE_CONTAINER_FAILED

15813 (0x3DC5) – State Manager failed to enumerate the containers.

ERROR_STATE_ENUMERATE_SETTINGS_FAILED

15814 (0x3DC6) – State Manager failed to enumerate the settings.

ERROR_STATE_COMPOSITE_SETTING_VALUE_SIZE_LIMIT_EXCEEDED

15815 (0x3DC7) – The size of the state manager composite setting value has exceeded the limit.

ERROR_STATE_SETTING_VALUE_SIZE_LIMIT_EXCEEDED

15816 (0x3DC8) – The size of the state manager setting value has exceeded the limit.

ERROR_STATE_SETTING_NAME_SIZE_LIMIT_EXCEEDED

15817 (0x3DC9) – The length of the state manager setting name has exceeded the limit.

ERROR_STATE_CONTAINER_NAME_SIZE_LIMIT_EXCEEDED

15818 (0x3DCA) – The length of the state manager container name has exceeded the limit.

ERROR_API_UNAVAILABLE

15841 (0x3DE1) – This API cannot be used in the context of the caller’s application type.